CEO Greetings
Company introduction
Technical research institute
Company history
Partner relations
Location
Patent and registration data
Configuration diagram of Planar Trans Auto-Line
Data Collection
Dryer
Impregnation machine
Automation equipment
Testing machine
Molding machine
Others
 


  JY-VCR Automatic vacuum impregnation machine   

Automatic vacuum impregnation machine

⟪ overview ⟫
This vacuum impregnation machine has (10/-3) TOOR vacuum degree to prevent the noise phenomenon and the internal moisture in the motor since the varnish liquid cannot reach deep down on the coil with a typical dipping method. It uses high vacuum pump to handle the tank’s capacity up to 4800Liter, and penetrates the varnish liquid deep down on the inside of the motor. This facility is designed to produce a perfect motor.

*Vacuum specification : -760mmHg , *Pressure specification : 0.5kgf/cm2

*Manufacture specifications

1- Body Frame
① Dimensions = W:4650mm , D:3280mm , H:450mm
② Material = 75mm * 75mm ss41 square pipe

1-1 Working vacuum tank
① Dimensions = W:1500mm , D:1200mm , H:1200mm x 2EA
② Material = SS41 * 10t
③ Strength reinforcing support = SS41 16t*50mm*18EA x2= 36EA
④ Observation window for Flow level = H:440mm* D:110mm Tempered glass 15t * 2set x 2

1-2 Working tank door
① Dimensions = W:1620mm , D:1320mm T30 x 2EA
② Material = AL6061
③ Pressure dispersion dome = W:1440 , D:900 , H:150 (Semicircle shaped) SS41 6t x 2

1-3 Mixing tank
① Dimensions = 1200∅ H:1700mm , Upper, Lower: Incline plate dome, 2EA
② Material = ss41 * 10t
③ Flange = 22t * 75 mm 3EA x 2
④ Manhole = 300∅ Open and close type 2EA
⑤ Observation window for Flow level = H:440mm , D: 110mm 2EA x2
⑥ Observation window for Lighting conditions = 150∅ x 2EA
⑦ Mixing speed reduction motor = 3HP 1/40 x 2EA
⑧ Impeller = Stirring by dividing the upper, middle and lower part

1-4 Auxiliary vacuum tank
① Dimensions =400∅ H:600mm, Flange type
② Material = ss41 * 6t
③ Filter = 300∅ * H:550mm (Special order type)



목록 글쓰기 글수정 글삭제

COPYRIGHT(C) 2009 JINYOUNG ENGINEERING CO., LTD All Rights Reserved .
Address1 : #514,Gyeonggidaejintechnopark,Jajak-ro 155, Pocheon-si,Gyeonggi-do,Korea Tel +82-31-533-5770 / Fax +82-31-535-5790
Address2 : 110-33,Banwolsanseong-ro 375beon gil,Gunnae-myeon,Pocheon-si,Gyeonggi-do,Korea Tel +82-31-535-8230,8231,8236 /
Fax +82-31-535-8351 / Mobile : +82-10-8929-2436 / E-mail : jypsm@hanmail.net / This page has applied the fonts provided by Naver.